Set LED Pattern Bits
pcb.led_set(bits)
This register allows emulation of the rt.buffer LED patterns. However, since the window on the N4X shows green/amber/blue, it is confusing to flash the PCB’s blue LED while the ip.buffer is alive.
Consequently, by default, the PCB will only flash the blue LED while the ip.buffer is asleep (or when the magnet/user is triggered).
Parameter | Type | Description |
---|---|---|
bits |
integer | The LED sequence bits |
There should be no need to use this function.
Triggering the magnet will produce a 2-5 flash pattern on the blue LED.